How to Determine Correct Adapter For ezHitch

Question

Question:

I’m looking at attaching my Thule chariot child carrier to my e bike but the ez hitch I have needs an adapter. My bike is a rear motor ebike Bitrix Stunner LT model. Can you help me out, or at least point me on the right direction ie question I can ask the bike company so that I can attach this carrier.

asked by: Sarah

0

Expert Reply:

That's a good question, and to determine the correct adapter, or if you can use one, your bike will need to have either 12mm through-axles or internal gear hub. If you take a look below at the linked instruction manual, there is a guide on how to choose the right one.

You will need to know different things for a 12mm through axle or internal gear hub. For example, an M12 x 1.0 mm thread pitch through hub with a 160 mm length would need the Syntace Hub Thru-Axle Adapter for Thule Bike Trailers - 12 mm x 160 mm # TH20100765.

Or if your bike has an internal gear hub that is 3/8" then you would need the Hitch Adapter for Chariot ezHitch - For Bikes with Internally Geared Shimano Hubs # TH20100797.

The manufacturer of your bike should be able to tell you this information.

expert reply by: Kyle S

0

Answer 1

The Thule Courier Bike Trailer and Stroller #TH69HC will fit most bikes. But it does require an adapter depending on your bikes set-up. I have included a list of the adapters that we carry as well as some pictures that will help you in determining if…

view full answer...

Answer 2

Each of the leaves on the Leaf Spring #e47SR are 3/8" so this will give the spring pack a height of 1-1/2". Here is a list of our U-Bolt Kits for a 3" axle. Redline #APUBR-9 Dexter #APUBR-8 CE Smith #CE23003

view full answer...

Answer 3

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 4

As long as your mountain bike has a solid or quick-release rear axle, then the ezHitch for Thule Chariot Bike Trailer - Axle Mount - Solid and Quick-Release Axles #TH20100796 will work on your bike. If your bike has an Shimano or SRAM internal hub…

view full answer...

Answer 5

I have a solution, but I couldn't find that specific part number in our parts. I did a little bit of research and it looks like Specialized Turbo's usually have a 15mm x 100mm front fork and a 12 x 148mm rear hub opening with a Shimano gear…

view full answer...

Answer 6

Unfortunately there isn't an adapter from Thule for your bike's 12x148mm size thru-axle. I reached out to my contact at Thule and they don't have anything they can recommend because of safety concerns. We have lots of other sizes, but…

view full answer...

Answer 7

The Thule Vector M, part #TH613201, and the Vector Alpine, part #TH613500, are both great cargo boxes for your 2019 Audi Q7. They have the same crossbar spread requirements and have the same amount of cubic feet inside. The main difference is the…

view full answer...

Answer 8

I have a solution for you but there isn't a hitch adapter for your Radwagon 4 ebike. You will want to confirm but if your Radwagon has a 12mm axle you can use the Shimano Hub Thru-Axle Adapter for Thule Bike Trailers - 12 mm x 170 mm item…

view full answer...

Answer 9

It sounds like you need the bolt for the Snug Tite Hitch Lock for your Thule bike carrier. I can help you out with that. The threaded pin we offer is part #853-5917. I checked out your invoice and this pin will work great with your hitch lock and…

view full answer...

How to Determine Correct Adapter For ezHitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching