Reese Elite Gooseneck Ball With Andersen Ultimate 5TH Wheel Hitch

Question

Question:

2018 Dodge Ram 2500 Will this ball work on the Anderson hitch?

asked by: Jim C

0

Expert Reply:

The Andersen Ultimate 5th Wheel Hitch 3220 will fit onto the Reese Gooseneck Ball # RP19311.

This ball can not be used as a Replacement Ball # AM3201 on the Andersen Ultimate 5th Wheel Hitch # AM3200.

expert reply by: Bud M

0

Answer 1

We have the Andersen Ultimate Fifth Wheel Connection part #AM3200 which is the correct adapter to fit the industry standard fifth wheel rails you have. Reese hitches like what you have, and nearly all other fifth wheel hitch manufacturers, make their…

view full answer...

Answer 2

I can definitely confirm the B&W Ball and Safety Chain Kit #BWGNXA2061 will fit a 2017 Ford F-350 with the OEM Prep Package. That being said, there have been issues with the B&W #BWGNXA2061 installing with the Andersen Gooseneck Adapter…

view full answer...

Answer 3

Yes, the Reese Elite Series Pop-In Ball Kit #RP30137 for your 2019 Ford F-350 with the puck system is perfectly compatible with the Andersen Ultimate Connection 5th Wheel Hitch. You do not need to worry about any issues with regards to the hitch…

view full answer...

Answer 4

What you'll actually need is a Gen-Y lock for your Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Auto Latch like parts #GY58GR. The correct fit is the following: - Gen-Y Auto Latch Gooseneck Coupler Lock #325-GH-7111

view full answer...

Answer 5

The part number you need for a replacement hitch ball for your Andersen Ultimate Connection part #AM3200 is the part #AM3201. There are no greaseless balls that are designed as replacement balls for this product, but the #AM3201 is made of aluminum…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Reese Elite Gooseneck Ball With Andersen Ultimate 5TH Wheel Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching