Replacement Sweep Seal Roll For The Side Of Pace Edwards Retractable Hard Covers

Question

Question:

Is this the seal that run along the side or in the front?

asked by: Michael G

0

Expert Reply:

The Replacement Sweep Seal Roll # PE78UV that you mentioned is for sealing the retractable cover along the sides of your truck bed. This comes as a 16 foot strip that can be trimmed to the necessary length and is specifically made for the following Pace Edwards Retractable Hard Covers:
Bedlocker
Bedlocker with Explorer rails
Full-Metal JackRabbit
JackRabbit
SwitchBlade
UltraGroove

expert reply by: Andrew N

0

Answer 1

According to Pace Edwards, the FM2051 is indeed a Full Metal Jack Rabbit tonneau cover. The #PE78UV sweep seal would be the correct replacement gasket, which my Pace Edwards representative has confirmed.

view full answer...

Answer 2

For your Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWT5379 on your 2019 Toyota Tundra we have the following replacement parts. The Replacement Sweep Seal Roll #PE78UV comes in a 16' length and gets trimmed to fit. This…

view full answer...

Answer 3

For the Pace Edwards Switchblade we do have replacement seals. The Replacement Sweep Seal Roll #PE78UV comes in a 16' length and gets trimmed to fit. This will replace the sweep seals on the side rails for your Switchblade cover. The…

view full answer...

Answer 4

The Replacement Sweep Seal Roll #PE78UV is what you're looking for with your Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover w Explorer Series Rails #311-FEFA18A44. This seal kit is for where the top rail of the cover meets the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

There are some replacement parts available for the Pace Edwards BedLocker tonneau cover. There is a Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV and there is also the Manual Switch Kit for Pace Edwards BedLocker…

view full answer...

Answer 7

Right now, the only available tailgate seal that Pace Edwards offers is the rubber seal like the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV. This tailgate seal will fit the Pace Edwards Bedlocker, Full-Metal,…

view full answer...

Answer 8

There are some common things you can check to determine what is causing the poor braking performance. First, you do not want the trailer brakes to lock up and skid. You want them to be at a point just under that. The resistance of 12-1/4 inch by…

view full answer...

Answer 9

The replacement seals for your Pace Edwards Switchblade Retractable Hard Tonneau Cover #SWFA06A29 are the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV for the tailgate and the Replacement Sweep Seal Roll for Pace…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Replacement Sweep Seal Roll For The Side Of Pace Edwards Retractable Hard Covers

Product Page this Question was Asked From

Continue Researching