Can Dutton-Lainson Wiring Harness For StrongArm TW4000 DL24152 Be Installed Under Bumper Of Truck?
Question:
Possible to mount under the bumper? Dust cover available? then make the jumper?
asked by: Craig H
Expert Reply:
You can mount the Dutton-Lainson Wiring Harness for StrongArm Electric Winch Model TW4000 Manufactured after 2014 # DL24152 you were looking at underneath the bumper of your 2021 Ford F-150 to plug your Dutton-Lainson TW4000 StrongArm Electric Winch - Marine # DL25200 into without a problem.
You would need to use the quick connects # DL24086 and # 10-1-1 to go from the winch to the plug underneath your bumper, or if the # DL24152 has enough length to go directly to the winch you can cut the wire and the install the quick disconnects on both ends.
You do need to solder the # DL24086 to the wire instead of crimping it.
While there is not a dust cap made for the # DL24152, the # BDW58SV should fit just fine.
I included a few videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Bulldog Winch Sealing Cover for 175-Amp Quick Connect
- Accessories and Parts
- Electric Winch
- Wiring
- Covers
- Bulldog Winch
more information >
Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches
- Accessories and Parts
- Electric Winch
- Trailer Winch
- Wiring
- Quick Connects
- Dutton-Lainson
more information >
Dutton-Lainson TW4000 StrongArm Electric Winch - Marine - 1,500 lbs
- Trailer Winch
- Electric Winch
- Boat Trailer Winch
- Utility Winch
- Standard Duty
- Freespooling Clutch
- No Remote
- Polyester Strap
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Wiring Harness for StrongArm Electric Winch Model TW4000 Manufactured after 2014
- Accessories and Parts
- Electric Winch
- Wiring
- Wiring Harness
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of Replacement Wiring Harness for Dutton Lainson Strongarm Winch TW4000
- Q&A: Front Mount Trailer Hitch for 2015 Toyota 4Runner
- Q&A: Ground Clearance After Installing Front Hitch on a 2011 Toyota 4Runner
- Article: Trailer Wiring Diagrams
- Q&A: 2 Pole Connector for Powering Trailer Battery and Trailer Liftgate
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Will the Bulldog Winch Booster Work With A 10K Winch?
- Q&A: Recommended Electric Winch For a Lund Boat Trailer
- Q&A: Installing A Battery Isolator On The Trailer Side Of The Wiring Connection