Wiring Replacement Control Unit LC379606

Question

Question:

The prior owner cut some of the wire ends off so I need to rewire but need the wiring diagram my unit did not come with any instructions about which wire connects to what

asked by: Walter V

1

Helpful Expert Reply:

I contacted the manufacturer, Lippert, for you in regards to a diagram of wiring the Replacement Control Unit for Kwikee Electric RV Steps # LC379606.

I have attached for you below the diagram that they sent me.

expert reply by: Kyle S

1

Diagram For Wiring Control Unit LC379606
(click to enlarge)

Answer 1

For your Kwikee 32 Series RV steps, you can use the: -Replacement Motor for Kwikee Electric RV Steps #LC379147 for a replacement motor. For a replacement control module, you're going to need the: -Replacement Control Unit for Kwikee Electric RV…

view full answer...

Answer 2

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

view full answer...

Answer 3

I spoke with my contact at Lippert regarding your Kwikee Series 32 Step Assembly. I gave him all the information you provided regarding your step assembly, along with the information from the picture you attached. He was able to confirm that the…

view full answer...

Answer 4

I was able to look up part number 094707-04-700 and find the correct replacement control unit for the Kwikee steps in your motorhome. The correct part is the Replacement Control Unit for Kwikee Electric RV Steps #LC379146.

view full answer...

Answer 5

Your step control unit PN 909506000 can be replaced with Replacement Control Unit for Kwikee Electric RV Steps - 2 Door Switch Kits #LC379606. You do not need anything else to use this control unit in place of your old one. If your motor and other…

view full answer...

Answer 6

It sounds like you know exactly what you need. I can confirm you are correct the Replacement Control Unit for Kwikee Electric RV Steps item #LC379146 is the correct part for the Kwikee Series 42 powered steps that were made before 2005.

view full answer...

Answer 7

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. Unfortunately, if your steps were manufactured prior to February of 1999, then there are not replacement parts available and you'd need to replace the entire step. If it…

view full answer...

Answer 8

You actually can replace the control unit on your pre-2006 Kwikee steps with the Lippert Components (LCI) Kwikee pre-IMGL/9510 Step Control with 5323 and 5327 Switches for Motorized Motorhome Entry Steps #LC379606, which is designed for use with the…

view full answer...

Answer 9

The issue with the Kwikee Steps on your Itasca Navion IQ is actually the motor, not the controller. The problem with the motor is that it is not arching out which is then what sends the signal for the steps to shut off. Therefore, the Replacement…

view full answer...

Answer 10

For a replacement Kwikee Series 28 power step we have the part #LC3747451 which will replace everything. If you were looking for a replacement control unit you'd need part #LC379146 or if you needed a replacement linkage part #LC379648.

view full answer...

Answer 11

The correct replacement module for your Kwikee Series 39 is the part #LC379146 that you referenced.

view full answer...

Answer 12

The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 which is part 90950600 you referenced is does not have a specific wiring diagram, but I've attached the closest thing and have also included a video of an installation to…

view full answer...

Wiring Replacement Control Unit LC379606

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching