What is the Cable Diameter of the Curt Coiled Safety Cables

Question

Question:

What is the actual cable diameter size for the 3500# compared to the 5000#?

asked by: Fred S

0

Expert Reply:

The cable diameter of the Curt # C80151 (5k) is 5/16" diameter and the Curt # C80136 (3.5k) is 1/4" diameter.

expert reply by: Erik B

0

Answer 1

The S-Hooks on the Curt Single Hook, Coiled Safety Cables #C80151 have an opening of 13/16" so they will be slightly larger than the 3/4" diameter retention features on your OEM hitch. If you would like one that is a little larger…

view full answer...

Answer 2

It's hard to tell which cap you need exactly from the picture but I measured the caps we have that might work for you. Part #T4480701 for Titan Model 60 actuators measures 1-1/4 inches at the threads like you previously saw. Part #T4830601…

view full answer...

Answer 3

Thanks for the picture of your trailer clearance light. It's one of two options depending on how long it is. It's the part #MCL75RB if the light is 3-15/16 inches long or #AL91RB if it's 2-1/2 inches long.

view full answer...

Answer 4

I went out to the warehouse and pulled a set of Curt Single Hook, Coiled Safety Cables #C80151 to measure the size of the eye opening for you. The width at the widest point is 0.65 inches (between 5/8 and 11/16 inches). And at the longest the…

view full answer...

Answer 5

I spoke with my contact at Optronics and he stated that the lights in the Thin-Line LED Racing Light Kit, #LS-108, have an output of 180 Candelas. Candelas are about the same as Lumens. The output in Lumens is 179.8. Each light has an amperage draw…

view full answer...

Answer 6

The single wire plug #A91LW is designed to plug into a light that has the female plug already installed on the back of the trailer light. The #A91LW has a 12 inch lead wire with the male plug attached. Many of the Series 91 lights have two female…

view full answer...

Answer 7

I spoke with Curt and they informed me that the ferrule on the Curt Single Hook, Coiled Safety Cables part #C80151 is .59" diameter.

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

What is the Cable Diameter of the Curt Coiled Safety Cables

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching