Which Over-Under Conversion Kit For 2021 Heartland North Trail 22FBS W/ Tandem 3500 Axles
Question:
I am in process of buying a 2021 Heartland North Trail 29foot Model 22FBS. My driveway has steep access and need to lift the camper up to avoid rearend drag. Will the Dexter Axle over/under conversion kit, either K71-384-00 for 2 3/8inch or K71-385-00 for 3inch work?
asked by: Donald B
Expert Reply:
An over-under kit is a great option for gaining additional ground clearance to get into your steep driveway since they lift the trailer by the diameter of the axle plus the height of the leaf spring stack.
Since your 2021 Heartland North Trail 29' Model 22FBS has 3500lbs axles you will need the the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 as 3500lb axles have a 2-3/8" diameter.
I included a video of the # K71-384-00 for you to take a look at.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Breaking In Replacement 6,000 lbs Leaf Springs
- Q&A: Recommended Lift Kit for 2021 Forest River Gray Wolf Travel Trailer
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Article: Trailer Wiring Diagrams
- Q&A: What Leaf Spring Width SHould be Used with Dexter Over Under Kit # K71-384-00
- Q&A: How to Increase Trailer Ground Clearance Using an Axle Over-Under Kit
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current