What Are Mounting Brackets of Wheel Masters Level Master Trailer Bubble Level WM6780 Made of

Question

Question:

Wheel Masters 6780 Level Master and Bracket Kit. Is mounting bracket metal?

asked by: Nancy B

0

Expert Reply:

The mounting brackets for the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780 are made out of UV-protected plastic. The plastic is really durable though, and is designed to last, so it isn't going to just break apart, and won't corrode like a metal bracket would.

I have added a link below to a video review for you to check out as well of the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780.

expert reply by: Kyle S

0

Answer 1

You are correct, the slotted section of the bracket on the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket #WM6780 is another option for mounting the level to your pin box. I do not recommend using the slotted…

view full answer...

Answer 2

I do have an option for you but the Camco AccuLevel Trailer Bubble Level part #CAM25563 does not come with brackets or hardware to install. I recommend Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket part…

view full answer...

Answer 3

I am sure you could use adhesive to attach the Wheel Masters Level Master 2 Trailer Bubble Level #WM67200 to your fifth wheel if you wanted to but we don't have an option for that. You could use something like Liquid Nails.

view full answer...

Answer 4

5th Airborne pin box #5AB-E7920 fits in place of the Leland 7920 pin box which is 14 inches wide. The Wheel Masters Level #WM6780 has an adjustable bracket that will go up to 15-3/16 inches wide so it will fit!

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Yes, you'd just need to reach out to a qualified welder and have them weld on spring seats like part #TRSS300 to the top side of the Trailer Axle Beam with Easy Grease Spindles #e45GR. It's super common to do for people who have an underslung…

view full answer...

What Are Mounting Brackets of Wheel Masters Level Master Trailer Bubble Level WM6780 Made of

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching