Ford F-350 Dummy Tag Axle Using Timbren Trailer Axle with #42 Spindle and 8 on 6-1/2 hub
Question:
Hello. I am building a dummy tag axle for a ford f350 project. Is it possible to purchase the Timbren ASR400S02 system, but with the #42 spindles, thus allowing me to use with your 42865-kit. That being wheel hubs 8 0n 6.5 that match the Ford standard wheel. I dont want to use the 7000 lb axle system because I do Not want the tag to carry any load. Thank you for time. Mike Reynolds.
asked by: Mike R
Expert Reply:
Here is what I would recommend. While all your options would require a lot of modification, the Timbren ASR400S02 only offers 1" of deflection (suspension travel) which would more than likely be easily damaged when driven. I would say to use the Timbren # ASR1THDS01. It offers the most deflection of 3-3/8". That should limit the chance of damage when the main suspension does travel.
Timbren doesn't offer any #42 spindles for for this particular item. I recommend having #42 Spindle # TRU57FR fabricated on in place of the OE spindle. This should help you to set your wheel offset as well.
Then you will be able to use the Dexter Trailer Idler Hub Assembly # 42865-KIT that has your 8 on 6.5" bolt pattern.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and 7,000-lb Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 3,500 lbs
- Search Results: 3500 lb axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,200 lbs
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Q&A: Best Parts to Upgrade a Harbor Freight Trailer
- Q&A: Correct Timbren Axle-Less Trailer Suspension System for 2018 Scamp 13 Trailer
- Q&A: Do Leaf Spring Hangers Need To Be Welded To Bottom Of Frame Or Can They Be Welded To The Side?
- Q&A: Can Timbren Axle-Less Systems be Used In Tandem for a Tandem Axle Trailer
- Q&A: Replacement Trailer Axle For Dexter #9 Torflex 2,200LB Torsion Axle
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APS6SE Review
- Search Results: 4 inch hitch extension
- Q&A: Troubleshooting A DSI-FLT Error On An Atwood RV Water Heater
- Search Results: rieco titan jack
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Search Results: trailer axles
- Search Results: metric trailer hubs
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Article: Trailer Tire Sizing
- Article: Calculating Portable Generator Power Needs
- Article: Where to Position the Trailer Axle?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Raise Your Travel Trailer Height
- Article: 2023 Best Gifts for RVers & Campers
- Article: Slipper Spring Trailer Suspension System Review