Wiring And Hitch For A 2019 Toyota Sienna With A Hidden Cross Tube
Question:
All hitches available for the 2019 Toyota Sienna are manufactured in the US. Item # e98853 and Item # C13343 both have hidden cross tube designs, a 525lb pound max tongue weight, and a 3500lb gross towing capacity and is not compatible to be used with weight distribution. Item # 75237 has a 675lb tongue weight and a 4500lb towing capacity and can be used with weight distribution however; it has a visible cross tube. All hitches mount the same with the exception of trimming the under body panel. All are a steel construction with a black powder coat finish with 2"x2" receiver tube openings. If I was going to choose between the Curt and Etrailer with the hidden cross tube design, I would choose the Etrailer hitch. In my opinion, and I have hands on experience with all the hitches, the finish is much more durable.
asked by: Jack H
Expert Reply:
All hitches available for the 2019 Toyota Sienna are manufactured in the US. Item # e98853 and Item # C13343 both have hidden cross tube designs, a 525lb pound max tongue weight, and a 3500lb gross towing capacity and is not compatible to be used with weight distribution. Item # 75237 has a 675lb tongue weight and a 4500lb towing capacity and can be used with weight distribution however; it has a visible cross tube.
All hitches mount the same with the exception of trimming the under body panel. All are a steel construction with a black powder coat finish with 2"x2" receiver tube openings.
If I was going to choose between the Curt and Etrailer with the hidden cross tube design, I would choose the Etrailer hitch. In my opinion, and I have hands on experience with all the hitches, the finish is much more durable.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Roof Rack For a 2024 Toyota Camry For Carrying a Kayak
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Is Underbody Panel Re-Installed After Mounting etrailer.com Hitch # E98853 on 2011 Toyota Sienna
- Q&A: Why is Trailer Wiring that Draws from Vehicle Battery Better than Non-Powered Kit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Trailer Hitch and 4-Bike Rack For A 2020 Toyota Sienna
- Q&A: Best Trailer Hitch For 2020 Toyota Sienna
- Q&A: Recommended Trailer Hitch for 2020 Toyota Sienna
- Article: How to Measure for Trailer Hitch Drop
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Rust Prevention
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Rooftop Cargo Carriers
Jack H.
3/9/2021
All hitches available for the 2019 Toyota Sienna are manufactured in the US. Item # e98853 and Item # C13343 both have hidden cross tube designs, a 525lb pound max tongue weight, and a 3500lb gross towing capacity and is not compatible to be used with weight distribution. Item # 75237 has a 675lb tongue weight and a 4500lb towing capacity and can be used with weight distribution however; it has a visible cross tube. All hitches mount the same with the exception of trimming the under body panel. All are a steel construction with a black powder coat finish with 2"x2" receiver tube openings. If I was going to choose between the Curt and Etrailer with the hidden cross tube design, I would choose the Etrailer hitch. In my opinion, and I have hands on experience with all the hitches, the finish is much more durable.