Availability of 5 Inch Drop Ballmount With Preinstalled 2 Inch Trailer Ball
Question:
Hello, I was wondering do you guys sell a complete 5” with a 2” ball set up? Thank you!
asked by: Nick
Expert Reply:
We don't offer a 5 inch drop ball mount, but if you were to use a 4 inch drop like part # C93KR and installed a
# 63845 ball, you'll get a bit of squat in the rear suspension of the vehicle (which would vary according to the trailer's tongue weight) that would put you close enough to the 5 inch drop you're looking for. The ball needs to be torqued to 250 foot lbs, but any local shop should be able to do that for you without charging you an arm and a leg.
The trailer doesn't need to be exactly level, but we recommend getting as close as possible. As long as you're within 2 inches of level, you'll be perfect. If you don't already have a hitch pin, you can use either # PC3 or # e98882 for a locking hitch pin.
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 2" Rise, 4" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 2 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Class III Ball Mount with 2-5/16" Ball - 6" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2-5/16 Inch Ball
- One Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Bearing Kit for Horse Trailer with Bearing ID of 1.25 1.75 and Seal 2.25 inch
- Q&A: Is there a Replacement for Dexter Nev-R-Lube Hub 008-386-80
- Q&A: Replacement Grease Seal for Transcom TCM22333TBN
- Q&A: How Do I Add a 7-Way Connector to a 2023 Subaru Ascent?
- Q&A: Recommended Trailer Hitch Ball Mount Rise for U-Haul Trailer Coupler for 2015 Mazda CX-5
- Q&A: Adapter Recommendation for In-Bed 6-Way Connecting to Trailer 7-Way
- Article: Determining Trailer Tongue Weight
- Q&A: What are the Functions of the Red and Black Wires on the Optronics Trailer Light # STL89RCB
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices