Parts Needed To Add Second 4-Way Connector On 2020 Ford F-250 W/ Truck Bed Camper and Trailer

Question:

I have a 2020 F250 and truck bed camper. I cannot plug bed camper and my utility trailer at the same time in my 7 pin or 4 pin outlets on rear bumper. You can only use one or the other. Is there a 2 to 1 adapter for this situation? All I need is the 4 pin flat. Thanks.

asked by: Bill H

Expert Reply:

I have a solution for you, but we do not have an adapter that will turn the single 4-way connector on your 2020 Ford F-250 into two.

Instead I recommend using the 4-Pole Hardwire Kit with Circuit Tester # 18252 to splice into your factory wiring behind the 7-way/4-way connector which will allow you to either use the 7-way and the new 4-way, or both of the 4-way connectors. You will need to use the included circuit tester to identify the functions of your factory wiring and make the following connections:

Brown wire to tail lights
Green wire to passenger side turn signal
Yellow wire to driver side turn signal
White wire to ground

I included a video of the # 18252 being installed for you to take a look at.