Can Dexter Over Under Axle Lift Kit be Used on Slipper Spring Suspension
Question:
I have a 2003 Coleman Niagara pop up camper made by Fleetwood. It scrapes coming in and out of my driveway, and I want to lift it a few inches. It has a 3500lb 2 3/8straight axle . I bought the following kit to do a spring over axle conversion: K71-384-00 It stated that it is for double eyelet leaf springs. When removing the axle, I noticed it has single eyelet leaf springs with a hook on the slipper end. I have the following questions: 1 Do I need to replace my leaf springs with double eyelet? 2 If so, does that require new spring hangers? 3 If I need to replace springs, will I still need to do the spring over conversion, or do the double leafs automatically give more height? Thanks,
asked by: Watts U
Expert Reply:
The Dexter Trailer Springs Over-Under Conversion Kit part # K71-385-00 CAN be used with slipper springs like what your Coleman Niagara has. However, the process of installing this kit on a trailer with a set of slipper springs is more indepth than installing this kit on a trailer with a set of double eye leaf springs.
There are two issues that need to be addressed when using the Dexter Trailer Springs Over-Under Conversion Kit on a trailer with slipper springs, movement of the spring seat and dimensions of the u-bolt plate. Since slipper springs will shift back and forth as the trailer is in motion, the spring seats need to be fully welded to the trailer axle. In regards to the dimensions of the u-bolt plate, slipper spring are generally 2" wide and double eye leaf springs are generally 1-3/4" wide. This means that the u-bolt plate included with the kit will not work for you if your leaf springs are 2" wide. You will instead need to make your own which is fairly simple.
If you ask me, swapping out the u-bolt plate and welding the spring seat is easier and more cost effective than changing leaf springs and leaf spring hangers. According to Dexter Axle, the above process is permitted using the Dexter Trailer Springs Over-Under Conversion Kit.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Recommended Suspension Enhancements for a 2022 Grand Design Imagine 2910BH
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Article: Slipper Spring Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Is it Possible to Raise Suspension of Trailer that Has Slipper Springs
- Q&A: Installation of Dexter Kit # K71-385-00
- Q&A: Do Spring Seats Have to Be Welded to Install Axle Over Under Kit
- Q&A: Replacement Leaf Springs and Wet Bolt Kit For a 2007 Fleetwood Redline 33 Toyhauler