How To Find Correct Replacement Hub/Drum for Jayco Eagle
Question:
Hello I have a 2019 jayco Eagle HT what is the best way to figure out what hub and bearing assembly i need ? I would like to to have a spare on hand
asked by: Scott J
Expert Reply:
In order to find the correct replacement hub/drum assembly for a trailer you'll need to know the axle capacity which can be found on the axle tag in the center of the axle. The two most common are 3,500 lb and 5,200 lb. The correct replacement for a 3,500 lb is the Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K and the correct replacement for a 5,200 lb - 6,000 lb is the Trailer Hub and Drum Assembly part # AKHD-655-6-EZ-K. We also offer the Trailer Hub and Drum Assembly part # AKHD-865-7-1-EZ-K for 7,000 lb axles.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 14125A
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Top Gifts for Dads in 2024
- Q&A: How To Replace the Locking Cable On a Yakima HoldUp Bike Rack After Face Has Been Damaged
- Q&A: Lippert Crank Handle for Lippert Spare Tire Winch Assembly
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies
- Q&A: How is Lippert Spare Tire Winch LC159056 Raised and Lowered
- Q&A: Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease
- Q&A: How Does Lippert Components Spare Tire Winch with Offset Cable Crank Up and Down
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Charge a Dump Trailer Battery
- Article: Best RV Roof Vents
- Article: What is Boondocking