How Does Solera Family Room for 10 Foot RV Awning Attach

Question

Question:

Solera family room. How does it attach to the canopy?

asked by: Mark

0

Expert Reply:

That's a good question, and attaching the Solera Family Room for 10' RV Awning # LC362225 will actually require you to first install some brackets directly under your awning.

I have added some cutouts from the installation instructions to give you an idea of how it works, as you'll install the brackets and attach the Family Room to that, and it has a strap which you'll wrap over the roll tube.

For the full details I do recommend checking out the link below to the installation instructions of the Solera Family Room for 10' RV Awning # LC362225.

expert reply by: Kyle S

0

click to enlarge

Cherylyn

3/1/2024

Newbie here! Is this a permanent attachment? What is the work involved with this set up and take down each trip? Can I see an installation video?

Reply

Kyle S.

3/1/2024

@Cherylyn The Solera Family Room # LC362225 has brackets that are permanent attachments, but the panels you have to take on and off each trip and store them in bags. You just need to attach the panels to the brackets and awning (and in reverse to take them off) each time, which takes 15ish or so minutes. Unfortunately we don't have an install video right now.

Reply

Answer 1

The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle…

view full answer...

Answer 2

Lippert has a couple of awing's listed at 10-6" for a center-to-center measurement as measured from the center of the arms, these may have an awning fabric of either 9'-10" or 10'-1". I recommend the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

In order to determine the correct screen room for your awning you will need to know the width. The same is true for the Solera family room. Our available Lippert screen rooms are designed for use on select Solera, Carefree, and Dometic RV awnings.…

view full answer...

Answer 5

The Solera 20' Sand Fade w/ Black Weather Guard RV Awning (Std) #LCV000231498 will work very nicely with the Solera Family Room #LC362235. I've attached the instructions in photo form to assist with the installation.

view full answer...

Answer 6

My contact at AirBedz advised their XUV Air Mattress with Built-In Rechargeable Battery Air Pump #341031 measures 52-inches wide at the wider end and 43-inches at the narrower end where the air pump is located. Please refer to the photo I made for…

view full answer...

Answer 7

I reached out to the manufacturer and they confirmed for me that they do not have a mattress like the AirBedz XUV Air Mattress #341031 that accounts for the seat angle. They also do not provide custom made options. My only suggestion would be to look…

view full answer...

Answer 8

Your best bet to finding the vacuum line on your 2021 Jeep Wrangler so you can install the Demco Air Force One Supplemental Braking System w/ Wireless Coachlink - Air Brakes - Proportional Item #DM26VR is to first locate your vacuum pump. I've…

view full answer...

How Does Solera Family Room for 10 Foot RV Awning Attach

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching