Mounting Bolts for the Malone FoldAway 5

Question

Question:

Do you have longer carriage bolts for the Malone Foldaway 5 kayak carrier. 4 to 5.5 would work.

asked by: Marty F

0

Expert Reply:

The Malone FoldAway 5, part # MAL38FR, comes with two sets of mounting bolts. The longer of the two measures about 3". However, if this is not long enough, then you will need to pick up longer ones at your local hardware store as we do not have them here.

expert reply by: Kef G

0

Answer 1

What I recommend for Rola roof rack 59758 and your 2012 Honda Civic sedan to carry the paddle board is the Thule SUP Shuttle Stand-Up Paddleboard Carrier, #TH811XT. This carrier will fit the Rola bars and was designed for paddle boards. I have…

view full answer...

Answer 2

I have a great solution for the measurement problem. Unfortunately, both eTrailer and Malone do not currently have the Malone FoldAway-5 Kayak, SUP, and Canoe Carrier with Tie Downs - J-Style - Folding - Side Loading #MAL38FR. Although, we do have…

view full answer...

Answer 3

Both the 811 and the #TH811XT can hold 2 boards. I personally searched the manuals for both products to verify this. The 811 was a first run so it likely has parts that are riveted together rather than using screws. Generally that is how Thule does…

view full answer...

Answer 4

I attached a review video for the Thule SUP Shuttle Stand-Up Paddleboard Carrier with Tie-Downs #TH811XT that shows how to transport ONE SUP. To carry two boards the install will be very similar. I spoke to my contact at Thule to get their official…

view full answer...

Answer 5

I did some research on the weight capacity of your Leer XR100 topper and while I wasn't able to get an exact figure I can say it would pretty easily handle two 45 lb kayaks and the Malone Foldaway carrier part #MAL38FR would work really well to…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Mounting Bolts for the Malone FoldAway 5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching