Adjustable Ball Mount for 2-1/2 Inch Hitch with 6 inches of Drop

Question

Question:

I need a 2-1/2 x 2-1/2 adjustable receiver channel-style mount. I would also need the attaching mount for a single 2-5/16 ball. Adjustments only need to be down to a 6 . Thank you.

asked by: Raymond S

0

Expert Reply:

The best option we have for what you are looking for is the Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K # C45902 which fits your 2-1/2 inch hitch, can do a drop of up to 6 inches, and comes with a 2" and 2-5/16" hitch ball.

expert reply by: Jameson C

0

Answer 1

The Ford 2-1/2 inch trailer hitch on your 2005 F-350 does have a different corner radius then what 2-1/2 inch accessories have so there have been some fit issues. But the Curt products such as adjustable ball mount #C45902 didn't seem to be a…

view full answer...

Answer 2

If the tires on the rear axle of your tandem axle horse trailer are running hotter than those on the front axle, this could be due to several possible causes. One of these causes you mentioned; the trailer not being level when hitched. If the trailer…

view full answer...

Answer 3

The best option for a hitch lock with the Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 5-1/2" Drop, 4-1/2" Rise #C79NR is from InfiniteRule: - InfiniteRule Hitch Lock for 2-1/2" Hitches #34061072-D This is a stainless steel hitch…

view full answer...

Answer 4

The Replacement Shank #C45917 is for the Curt Adjustable 2-Ball Channel Mount #C45902 which has a 5-1/4" rise/6" drop. I reached out to Curt and my contact said that at this time (July 2020) there is no replacement shank for the Curt…

view full answer...

Answer 5

The sway control that you'll need to use with your 20K Curt Adjustable 2-Ball Mount #C45902 for a 2-1/2" trailer hitch is the Tuson Asymmetric Sway Control #335TSC-1000 because it installs on the trailer frame and uses the trailer brakes to…

view full answer...

Answer 6

We have just what you need. For your Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K #C45902 you will need the Curt Lock Set for Adjustable Channel-Style Mounts #C23556 which was made specifically for this ball…

view full answer...

Answer 7

Sure will! 2-1/2" shank ball mounts like the Curt Ball Mount #C79NR you mentioned are made to a standard size allowing them to be installed in all trailer hitches that are 2-1/2". You'll have zero issues using it in the Draw-Tite…

view full answer...

Answer 8

As you can see from the diagram I made for you, the total height is 10-5/8" for the Curt Adjustable 2-Ball Mount #C45902. The #C45902 is for 2-1/2" hitches, comes with a dual 2" and 2-5/16" hitch ball with 10k and 20k respective…

view full answer...

Answer 9

The Curt Fusion Ball Mount for 2" Hitches, #C45154, is a great fit for your 3-1/2 inch drop. You may also want to consider an adjustable ball mount like Curt's Adjustable 2-Vall Mount, #C45902. An adjustable ball mount will allow you to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Adjustable Ball Mount for 2-1/2 Inch Hitch with 6 inches of Drop

Product Page this Question was Asked From

Continue Researching