Is 4 x 8 the Total Length of Undampered RV Floor Register

Question

Question:

Undampered RV Floor Register - 4 x 8 - Steel - Black Item # 37202-29165 Is the opening for the vent 4x 8? Or total length of the floor register?

asked by: Carlton B

0

Expert Reply:

Good question, and the 4" x 8" measurement is referring to the opening of the Undampered RV Floor Register; the total length of the register is approximately 5-1/2" x 9-1/2". The 4" x 8" undampered register does come in your choice of three different colors:

- Black: Undampered RV Floor Register # 37202-29165

- White: Undampered RV Floor Register # 37202-28945

- Brown: Undampered RV Floor Register # 37202-28955

I have added links below to a couple video reviews for you to check out as well if you'd like.

expert reply by: Kyle S

0

click to enlarge

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 4

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 5

Hi Robert, So there isn't one that can be used with a cordless drill (which would be an electric jack only) as all the electric A-frame jacks are all higher than the 12" to 14" you want. There is a manual crank jack you can use which I…

view full answer...

Answer 6

Hi Robert, So I know you don't want to, but the only option for a hitch extension for your 2-1/2 inch hitch does reduce the receiver to 2 inches. I hope you're not mad at me, but there unfortunately is no 2-1/2 inch hitch extender that also…

view full answer...

Answer 7

We do have an option for you - and you did indeed measure correctly - but there isn't a sink that is exactly 28-3/4 x 17-1/2. It's pretty uncommon for there to be an exact match, but you definitely do not have to replace the entire counter.…

view full answer...

Answer 8

As far as floor vents that are close to 5x10 inches, we have a few different options: - Dampered RV Floor Register - 4" x 10" #37202-29015 (brown) - Dampered RV Floor Register - 4" x 10" #37202-29175 (black - Undampered RV Floor…

view full answer...

Answer 9

When replacing your floor vent you will just want to take a measurement of the opening that your current vent actually drops into. The JR Products Undampered RV Floor Register #37202-28955 that you referenced is designed for a 4" x 8"…

view full answer...

Answer 10

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 11

We have everything that you need to set up your 2011 Toyota Highlander for towing. First, if you don't already have a trailer hitch, I recommend installing the Draw-Tite Max Frame Class III Trailer Hitch #75726 because it has more than enough…

view full answer...

Answer 12

The best way to determine if your 2012 Toyota Highlander has a factory tow package is to have a Toyota dealer run the VIN number in their computer system. They can tell you how the vehicle is equipped that way. If they say you do not have the tow…

view full answer...

Is 4 x 8 the Total Length of Undampered RV Floor Register

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching