Can I Use the Timbren Axleless Suspension on a 2015 Starcraft Comet H1235SB
Question:
Hello, I have a 2015 Starcraft Comet H1235SB and would like to have an axle-less suspension installed. The following is what I had in mind, open to suggestions, though. Also, is this kit compatible with my trailer? Timbren Heavy-Duty Axle-Less Trailer Suspension - 4 Lift Spindle - Off-Road Tires - 3,500 lbs Timbren Trailer Leaf Spring Suspension ASR35HDS02 Thanks,
asked by: Steve O
Expert Reply:
Yes. The beauty of the Timbren Axle-less suspension systems like the # ASR35HDS02 is that they're designed to be a universal replacement that can be welded or bolted on to your trailer's frame, so these will work on your 2015 Starcraft Comet H1235SB.
This system has EZ lube spindles so I recommend using the Dexter # 8-201-9UC3-EZ hub and drum assemblies and the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA brakes to complete the axle. You'll also need brake mounting hardware with part # BRKH12.
I've linked some review and installation videos of these parts for you to check out. If you need a specific bolt pattern for your wheels, let me know and I can see if there is a hub/drum that would work for the Timbrens that allows this.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Article: Best RV Roof Vents
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Lock N Roll Articulating Coupler A-Frame Dimensions
- Q&A: Timbren Axle-Less Suspension Kits with 4-Inches of Lift
- Article: Where to Position the Trailer Axle?
- Q&A: Upgraded Trailer Axle Solution for 4x8 Harbor Freight Trailer
- Q&A: Voltage Used by the SeeLevel Sensors # SE27VR
- Article: How to Raise Your Travel Trailer Height
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight