Storage Cover for 10 foot 1964 Compact Shasta Camper

Question

Question:

We live in southern Ohio. What cover would you recommend for us?

asked by: George W

1

Helpful Expert Reply:

Can you get me the length of your camper? Due to the age I was not able to find that info online.

expert reply by: Jameson C

1

George K.

1/6/2021

We live in southern Ohio. What cover would you recommend for us?

Reply

Jameson C.

1/6/2021

Best option would be the Adco Storage Lot Cover part # 290-74838 based on that size. It's a little big but most covers that are for 10 foot campers are for pop ups.

Reply

Answer 1

While the Classic Accessories Deluxe PolyPro III Heavy #CA80198 is designed for R-pod style trailers, it is similar enough in shape to your canned ham style that it will still work for you. The cover fits up to 16-1/2', so it is long enough…

view full answer...

Answer 2

The overall dimensions of the Classic Accessories PolyPro III Deluxe RV Cover for R-Pod Trailers up to 16' 6" Long part #CA80198 are 163" long x 78" wide x 93" high. Therefore, so long as your trailer is…

view full answer...

Answer 3

We have just what you need for a water proof cover for your canned ham style vintage camper with the Classic Accessories Deluxe PolyPro III part #CA80198 which was designed for the R-pod style trailers that share the same shape as your trailer and…

view full answer...

Answer 4

I do not have an exact fit for your 1972 Shasta Compact Trailer that is 10 foot long x 7 foot wide but we do have some options that might work. I recommend the Adco SFS AquaShed RV Cover for Travel Trailers up to 15' 1/4" Long -…

view full answer...

Answer 5

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 6

I may have a solution for you, but we do not have a cover that is specifically designed for a canned ham style camper that is only 10-ft long. The best solution I can offer is the Adco Polypropylene Storage Lot RV Cover for Travel Trailer - Up To…

view full answer...

Answer 7

Excellent question. There is no disadvantage to using a special trailer tire with a higher weight Load Range Rating than is required by your trailer's weight. Doing so simply means that those higher-rated tires will tend to run cooler, since they…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Storage Cover for 10 foot 1964 Compact Shasta Camper

Product Page this Question was Asked From

Continue Researching