Malone Roof Rack on Wheels with Kayak Carriers on Ends of Crossbars

Question

Question:

Is there enough room to carry 2 kayaks on 4 J-hooks AND 2 paddle boards perhaps, squeezed in the middle? Or how would you configure that?

asked by: Greg B

0

Expert Reply:

We carry a version of the Malone trailer # MAL53FR that comes with J-style kayak carriers on the ends with part # MAL93FR which easily has room down the middle for paddleboards.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I recommend the RetraxPRO XR Hard Tonneau Cover #RTT-80485 and Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955 as the best combination for your 2024 GMC Sierra 3500 long bed. The ladder rack will mount to the t-slot channels in the…

view full answer...

Answer 3

Yes, it does! The PowertraxPRO XR Hard Tonneau Cover item #RTX84QR is confirmed to fit the 2024 GMC Sierra 3500 with a 6-3/4' bed. The slots built into the cover are compatible with Yakima ladder racks like the OverHaul HD Adjustable Truck…

view full answer...

Answer 4

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR.…

view full answer...

Answer 5

Furrion had to come up with an adapter for their Vision S systems like the part #FOS07TASF with the part #FR87PR which fixes the problem that your truck has with this camera setup.

view full answer...

Answer 6

Yes, the Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101 could be installed on the tongue of the Malone EcoLight Trailer part #MAL53FR in place of the union plate that joins the two pieces of the tongue together which is pictured below. I…

view full answer...

Answer 7

The Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101 is what I recommend for a Malone EcoLight Trailer part #MAL53FR. The Retractable Tongue Kit for Malone MicroSport Trailers part #MPG494 will fit on the tongue but the MicroSport has a one piece…

view full answer...

Answer 8

The Rhino Rack Backbone systems like the #RRRTTB1 that you referenced have a dynamic weight capacity of 220 lbs and a static capacity of 737 lbs when used with the Rhino Rack platforms like the #RR24AB that is a confirmed fit for your 2014 Toyota…

view full answer...

Answer 9

The Rhino-Rack Backbone Roof Rack Mounting System #RRRJLB1 is designed to reinforce the structure of your Jeep's hard top so you can carry more weight but it won't physically interfere with the removal of the hard top. Once installed you will…

view full answer...

Answer 10

You actually do not want the weight of the load on a trailer to balance perfectly on either side of the axle. You want more weight forward so that the trailer doesn't sway. What you'll want is 10-15 percent of the total trailer weight as…

view full answer...

Answer 11

The big difference between the two trailers is the EcoLight trailers like part #MAL43FR were made to be lighter weight for smaller vehicles and have lower weight capacities. This weighs 145 lbs and has a 400 lb capacity whereas the MicroSport…

view full answer...

Answer 12

The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 that you referenced was designed to be used with boats that are up to 14 feet in length like what you have now. I attached a picture that shows the range of where the winch…

view full answer...

Malone Roof Rack on Wheels with Kayak Carriers on Ends of Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching