Timbren Axle Less Setup for Off Road Camper that Uses Jeep Wheel Bolt Pattern
Question:
i have a 2018 runaway range runner 6x9 camper and there is only about 6 inch clearance as it sits now 3500 axle. i drive a Jeep Wrangler and would like to take camper off road. would timbren axleless sysytem work for my purposes? and how do i know which one would fit my needs? currently camper has 15 inch camper tire and would like to put jeep 31 inch tire and rim i already own on camper, bit does not fit over current hun- does that change what i would need? jeep has 35 tires. thank you in advance.
asked by: Vicki
Expert Reply:
For a Timbren Axle Less kit that can have a hub installed on it that uses the Jeep bolt pattern of 5 on 5 inch you'd want the part # ASR1THDS03 which also has a 4 inch lift built into it and a wider spindle setup that allows for wider tires as well.
For an idler hub with the right bolt pattern that fits this you'd need the part # AKIHUB-550-35-K. For a hub drum we have the # AKHD-550-35-EZ-K.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Fulton Spare Tire Mount
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 12-1/4" Long
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long
- Shop: Loadstar ST205/75D15 Bias Trailer Tire - Load Range C
- Shop: Fulton Economy Spare Tire Mount with Wheel Nut Lock
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: What Issues Could Happen If 17" Wheel Was Used With Hub and Drum Assembly AKHD-550-35-EZ-K?
- Shop: Brake Controller
- Q&A: Wiring Up Reverse Lights on Trailer to Use as Both Reverse Lights and Utility Lights
- Q&A: Replacement Hub/Drums for 3500 Axle With 5 on 5 Bolt Pattern
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: Timbren Axle-Less Suspension Kits with 4-Inches of Lift
- Q&A: How To Use 5 on 5 Wheels with the Timbren Heavy-Duty Axle-Less Trailer Suspension
- Q&A: Timbren Axles Trailer Suspension For Overlanding Trailer