Parts Needed to Convert Fifth Wheel Rail Kit of 2021 GMC Sierra 2500 to Fit Husky Slider Hitch

Question

Question:

I have a Husky 16k slider hitch that was mounted on rails. What product is compatible to adapt the hitch to the 2021 GMC Sierra 2500 OEM puck system? Thanks

asked by: Jody A

0

Expert Reply:

To convert the OEM rail kit of your 2021 GMC Sierra 2500 to a set of rails compatible with your Husky Slider 16k hitch all you need is the part # DM6333 and you'd be set.

expert reply by: Jameson C

0

Answer 1

Total weight for the B and W Patriot Slider hitch part #BWRVK3270 is 221 lbs. The slider base on it's own weighs 169 lbs and the head weighs 52 lbs.

view full answer...

Answer 2

The B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BWRVK3400 that you referenced weighs 280 lbs. The hitch does pretty easily come apart to make taking it out of the bed of your truck a bit easier.

view full answer...

Answer 3

There is a B&W Companion Slider that will fit in the puck system of your 6-3/4 foot bed 2023 Chevy Silverado 2500. It is the B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package item #BWRVK3775. The Companion Slider…

view full answer...

Answer 4

The Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package, part #DM6333 has a shipping weight of approximately 106 lbs.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Parts Needed to Convert Fifth Wheel Rail Kit of 2021 GMC Sierra 2500 to Fit Husky Slider Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching