Can the Inno Velo Gripper Bike Rack for Truck Beds Be Used for Two Bikes

Question

Question:

I two have bikes... Do I need separate Inno clamps for each?

asked by: Tami S

0

Expert Reply:

The Inno Velo Gripper Bike Rack for Truck Beds part # INRT201 is designed to hold a single bike. It requires two clamps for one bike for proper support. If you need to carry two bikes, you can purchase another set of clamps and use them on the other side of the bed but I don't recommend using one set of clamps for two bike i.e. one clamp per bike.

expert reply by: Conner L

0

Answer 1

The Inno Velo Gripper Bike Rack #INRT201 can grab bike frames that are up to 1.03 inches in diameter. For mountain bikes that have wider frames you can instead attach the rack to the seat post. Or you could use a bike frame adapter bar part #UB01.…

view full answer...

Answer 2

For the 2020 Chevy Colorado I recommend to use 2 sets of the Inno Velo Gripper Bike Rack for Truck Beds - Clamp On part #INRT201 which easily clamp on the bed rail and hold the bike with it's rod and ratcheting strap system. We have had a lot…

view full answer...

Answer 3

You are going to need the Replacement Rails #PE54AJ for the Pace Edwards Switchblade Metal Retractable Hard Tonneau Cover #311-SMC3250 on your 2017 Chevrolet Silverado 1500. The Rails #311-SW5128 you found are for the Cover #311-SMFA05A28 which…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 5

Determining how to get the correct rise or drop is actually pretty simple and only requires two measurements. If you get the largest rise and drop you could wind up with more ball mount than necessary. In order to choose the correct ball mount, there…

view full answer...

Answer 6

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 7

Yes, the Inno Velo Gripper Bike Rack #INRT201 will indeed fit your 2017 Chevy Colorado.

view full answer...

Answer 8

I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack #INRT201. The black plate measures 4 inches long and 2-3/8 inches wide with a small lip that measures 1 inch wide. The bed…

view full answer...

Answer 9

The Inno Velo Gripper Bike Rack for Truck Beds, part #INRT202 is designed for trucks just like your 2012 Frontier. I have attached a photo of the #INRT202 for you. The small square plate( pointed out with an arrow in the photo) attached to the eye…

view full answer...

Answer 10

I recommend 2 sets of the Inno Velo Gripper Bike Rack for Truck Beds - Clamp On part #INRT201 for the bed of the 2020 Chevy Colorado. The Inno Gripper does not require cutting the bed liner in the new truck (if the truck has a bed liner) like with…

view full answer...

Answer 11

The Inno Velo Gripper #INRT201 will still work with the bike front wheel turned as long as the Gripper has something to grab onto. If it was just one Gripper holding the whole bike then there might be a stability problem. But there are 2 included so…

view full answer...

Can the Inno Velo Gripper Bike Rack for Truck Beds Be Used for Two Bikes

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching