Replacement Bearing Kit for Hubs with L44649 Outer Bearing and 442251 National Grease Seal
Question:
2005 Haulmark trailer M# RVT 85X19DT2 / GVWR 7000 Not able to get all the numbers off the bearings/ seal. Outer bearing L44649?, Inner seal 442251 National? How do I find out what bearing kit i need, looking for bearing kits for both axles.
asked by: Martin R
Helpful Expert Reply:
In order to find the correct bearing kit you will need to know all of the components that it contains, including either the numbers of both bearings or their sizes; the good news is that most of this can be determined with the information you've provided.
It appears that the most likely configuration for this trailer is 2- 3500-lbs axles, which would match up with your outer bearing being an # L44649; additionally the National 442251 seal has an inner diameter of 1.719" and outer diameter of 2.565", so the replacement seal would be the # 58846 . These would be paired with an # L68149 inner bearing, so the complete kit with all of these components is the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100; for a tandem axle trailer you would need 4 of these kits- 1 for each spindle/hub.
I've also linked our entire selection of hub and drum assemblies that uses all of these components in the event that you want to replace everything.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels