Changing Agricultural Spindles Or Axle For New Hub Assembly

Question:

ISO 2 IDLE HUBS AND 2 BRAKE HUBS. TAPERED AXLES, 1 ½” INNER SEAL, 1 1/16 INNER BEARING, 11/16 OUTER TINKEN BEARING # LM11749

asked by: Jeff K

Expert Reply:

I have another option but we do not carry any hubs that use the outer LM11749 bearing. Your spindle is an older agricultural spindle that we do not offer hubs or bearings for

I recommend changing your spindles or axles to accommodate more readily available hubs. For spindles you can weld on the BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter # TRU94FR which will allow you to use Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 # 34822545BX and Trailer Hub and Drum Assembly # AKHD-545-2-EZ-1K

If you want to change your axles you will need measure from the hub face to hub face, and from spring seat to spring seat of your current axle and use that measurement to find the correct length axle from the link of all of our axles I attached.

expert reply by: Samuel C