How is Valterra Water Pressure Regulator Disassembled to Install Rebuild Kit

Question

Question:

Water pressure rebuild kit how do I get the insides out of a valverde water pressure to replace it

asked by: John G

0

Expert Reply:

The gray cap of the # A01-1117VP is threaded so you'd need to start by unscrewing it so that you can access the internal components of the # A01-1117VP to rebuild it with the kit # A01-1112.

expert reply by: Jameson C

0

Answer 1

We do offer an adjustable water pressure regulator, part #A01-1117VP, that includes a gauge to display the outgoing water pressure. Output water pressure is adjustable from 0 to 160 psi. I'd recommend using this to incrementally increase your…

view full answer...

Answer 2

The short answer for this is yes, you will experience negative effects when using a Comfort Ride kit designed for a higher capacity. When using 7000-lbs springs on a 5000-lbs axl, you're going to create a much more harsh ride which could…

view full answer...

Answer 3

The hitch plate of the Torklift Tie Down part #TLF3008 when tightened down holds the tie down securely in the hitch tube by putting tension in it so that it can slide out.

view full answer...

Answer 4

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 5

So I just want to start with the brakes. Due to you having the 4,400LB Lippert axle you will need their Brake Kit #LC66WD for each axle. These brakes are forward self adjusting like the Dexter you were looking at. For a cushioned equalizer I prefer…

view full answer...

Answer 6

Thanks for the picture of your build sheet! It does look like the etrailer 6-Leaf Double-Eye Spring item #e94SR you purchased is the correct replacement spring. Feel free to email me back a picture of your suspension but unless you are flipping your…

view full answer...

Answer 7

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 8

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 9

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

view full answer...

Answer 10

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

view full answer...

How is Valterra Water Pressure Regulator Disassembled to Install Rebuild Kit

Product Page this Question was Asked From

Continue Researching