Brake Assemblies and Hub/Drums that Fit 3,500 lb Trailer Axles
Question:
Please review attached picture, I would like to install brakes on one axle. There is a 4 bolt flange from the factory. Please assist in identifying the required parts
asked by: STEPHEN D
Expert Reply:
Your trailer axle is a 3,500 lb axle which is what the brake assemblies part # AKEBRK-35 that you referenced designed for. Then for a hub/drum that fits these assemblies and the axle you have you'd want the part # 84546UC3.
To wire up the assemblies then you'd need 10 gauge wire like # 10-1-1 which we offer by the foot.
If you have a 4-way now and want to change it to a 7-way you'd need the part # HS381-9000 too as this is an upgrade kit for that conversion.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Tire Sizing
- Q&A: Recommended Hub & Drum & Brakes That Measures 10 x 2 1/4" and has a 5 on 4 1/2 Bolt Pattern
- Q&A: Do Self Adjusting Trailer Brake Assemblies Have to be Manually Adjusted Initially
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum