Is a Battery Connection Required when Installing a Trailer Wiring Harness on a 2012 Toyota Venza
Question:
Do I have to run the 12V black wire from circuit protector to the + terminal on the battery to use this quick connect t-wiring harness? There should already be power to the rear lights? If so, this is not a straight forward connection.
asked by: Marc
Expert Reply:
The Curt trailer wiring harness # C56079 does require a direct connection to the vehicle battery. This is what will power the trailer lights. It is designed this way to protect the sensitive wiring on the vehicle from any shorts that could end up damaging the vehicle wiring and/or electrical components.
The connection has to be made at the battery and not any other location because the harnesses have not been tested for use from an alternate power source. While there is power that runs through the light wiring on the vehicle it is not sufficient for the extra power draw from the trailer lights. The harness will not work if it is not connected to 12 volt power from the battery.
Routing the power wire is not as difficult as you might think, though it can be time-consuming. I have included a link to an FAQ article with tips on routing the power wire.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Troubleshooting Wiring Harness # 118482 on a 2011 Toyota Venza that Blows Fuses
- Q&A: Does Exhaust have to be Lowered to Install Curt Trailer Hitch on a 2012 Toyota Venza All-Wheel Drive
- Q&A: Installation Process for 4-Pole Trailer Wiring Harness 118482 in 2009 Toyota Venza
- Q&A: Can Converter Box On Curt 4-Way Wiring Harness Go Bad
- Q&A: Replacement Bearing and Idler Hub Options For a 2006 Snowbear Utility Trailer With 2,000LB Axle
- Q&A: Recommended Hitch and Wiring Harness for 2015 Toyota Venza
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Rooftop Cargo Carriers
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight