Weight Distribution Hitch Recommendation for my 420-590 Tongue Weight Camper.
Question:
The hitch capacity of my TV is 600lbs. The measured tongue weight is 420lbs, ready to camp. Occasionally Ill put 50 - 80 lbs forward of the TV axle, but I understand this doesnt affect capacity. If I go to a two 6v battery system Im now at about 480 lbs on the ball. I occasionally tow with a full fresh water tank, which will add 117 lbs to the ball. Add to that the weight of the WDH itself assume 80lbs, and worse case Im at 670-680 lbs on the ball. So, what hitch system and weight rating of bars should I get to safely cover both situations?
asked by: Dale S
Expert Reply:
We can get this figured out. Thanks for all of the information provided. It goes a long way in being able to determine exactly what you need. One thing to keep in mind is that the weight of the system is actually not added into the equation. It has a self balancing design and when set up has no weight added to the equation.
That means you are going to be between 420-590 in tongue weight regardless of the configuration you choose for that trip. With that in mind the Fastway e2 Weight Distribution w/ 2-Point Sway Control part # FA94-00-0800 would be an excellent fit. It offers two points of sway control to keep everything going the right direction and a 400-800 lb. tongue weight range. This will put you right in the sweet spot of the system without having to worry about maxing it out and not getting the results you want.
The 2" Hitch Ball part # A-90 from Curt and the 1-7/8" 12pt Thin Walled Socket part # ALL643216 are needed if you do not already have them to complete the set up.
Products Referenced in This Question
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Fastway
more information >
Product Page this Question was Asked From
Replacement Weight Distribution Bolt-Together Round Bar Head
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Round Bar
- Pro Series
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Solution for Needing Replacement Reese Weight Distribution Shank
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Pro Series Weight Distribution Head for Round Bar System
- Q&A: Replacement Head for Weight Distribution System
- Article: Determining Trailer Tongue Weight
- Q&A: Replacement Shank for Weight Distribution System Needing More Height
- Q&A: Is 8 inches From Bottom of Weight Distribution System to Ground Enough Clearance
- Q&A: Recommended Weight Distribution With Sway Control For Triple Axle Trailer With 18,000-Lb GTW
- Q&A: Why Disconnect Battery to Flat Tow Vehicle Behind Motorhome
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Troubleshooting Brake Controller Installations
- Article: How to Measure for Trailer Hitch Drop