How to Determine Correct Replacement Hub for R-Vision Trailer

Question:

2010 R-Vision Trail-Lite Crossover TLX170T. I cant find any identifying markings and I need to replace the hub on the drivers side. I show max weight is 3200 so does that mean a 3500 lb axle?

asked by: Robert J

Expert Reply:

I can tell you how to determine the correct replacement hub for your 2010 R-Vision Trail-Lite Crossover TLX170T, though based on the photos I looked up, this is a tandem axle trailer so it won't have 3,500 lb axles, and it is far more likely you have 2,000 lb axles.

To determine the correct replacement hub you will need to know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.

If you are unable to find them, you need to use digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure. Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which details how you can find it, as well as a printable bolt hole template you can use.

For example, the Dexter Trailer Idler Hub Assembly for 2,000 lb Axles # 8-258BTUC1 has a 5 on 4-1/2" bolt pattern, uses inner and outer bearing # L44643 (1" inner diameter) and grease seal # 34823 (1.249" inner diameter).

If you get back to me with this information I'd be happy to try and help you find the correct hub. I have also added a link to our entire selection of hubs for you to come back to.