Does Sportrack Horizon Rooftop Cargo Box fit Factory Crossbars of 2020 Toyota Highlander

Question

Question:

We are in the market for a rooftop cargo box for our 2021 Toyota Highlander XLE. I would like to know whether this cargo box will fit by utilizing the factory OEM crossbars pre-installed on the Highlander without having to purchase an aftermarket crossbar or roof rack system.

asked by: Andre A

0

Expert Reply:

Yes the Sportrack Cargo Box part # SR7016 is a confirmed fit for the factory crossbars of your 2020 Toyota Highlander. You would not need to purchase anything else to install this.

expert reply by: Jameson C

0

Answer 1

Since your key number starts with the letter E you can use replacement key #THKEYN179. SportRack/Thule locks with an N or E in front of the number will have replacements available.

view full answer...

Answer 2

What roof rack do you have currently? If you have a Thule rack and the lock core has N100 then the correct replacement key is part #THKEYN100.

view full answer...

Answer 3

We do offer both replacement keys and locks for Thule/SportRack products that have locks. Since they are sister companies the same locks and keys work for products from both brands. The code number on the lock is what you will use to select the…

view full answer...

Answer 4

For both the 2004 Toyota 4Runner and the 2021 Toyota Highlander, the Thule Thule Motion XT Rooftop Cargo Box - 22 cu ft #TH629906 will fit your factory crossbars if the bars are under 3-1/2 inches wide and 1-11/16 inches tall. In addition, the Thule…

view full answer...

Answer 5

The Thule #TH6357B Force XT cargo box is compatible with roof rack crossbars up to 3-1/2 inches wide and 1-11/16 inches tall with a spread (center to center distance apart of 23-5/8 and 36-1/8) apart. In order for the rear hatch to fully open with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Does Sportrack Horizon Rooftop Cargo Box fit Factory Crossbars of 2020 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching