Installing Electric Trailer Brakes on Shorelandr Trailer
Question:
Hello, i have a shorland r 2018 boat trailer. GAWR 3740. Does this hub fit? Also is there a right and left side or one fits both sides? VIN # 1MDAPAS14JA631635. Also i am switching hydrolic sirge brakes to electric. I have the tow box already in my truck and a 7 prong plug on my truck too. What other parts would i need yo order. Part numbers for everything would b3 greatly appreciated. Wiring also please. Thatnk you so much i hope you can help me.
asked by: John H
Expert Reply:
For your Shorlandr trailer, the hub/drums do not have a specific side, so the same part number is used for both left and right side. I recommend the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K as this is likely the bolt pattern you have on your current wheels. I've attached an article to help you confirm.
The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA does have a left and right specific side and there is a sticker on the assembly to assist with the correct side. The left side is the driver's side and the right side is the passenger side.
For your trailer wiring, I recommend using the Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector # HS381-9000. This will give you the 7-way and the connection box for your wiring conversion and electric brake wires. You will then use # 10-1-1 to each brake magnet. The wire will connect to one of the brake magnet wires and it doesn't matter which one of the two and then the other will be connected to ground on either the frame of the axle itself. I've attached an article to assist.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: What is the Diameter and Thread Pitch of the Mounting Hardware for 10" Brake Assemblies # BRKH10B?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Q&A: Will Trailer Lighting Circuit Still Work with 7-Way if Brake Controller isn't Used
- Q&A: How To Tell The Difference From Right and Left Electric Brake Assemblies
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G