What is the Wheel Bolt Pattern on the Kenda 205/65-10 Tire With Galvanized Wheel
Question:
Is this a 4/100 bolt pattern?
asked by: Joe
0
Expert Reply:
The bolt pattern on the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part # AM3H470 is a 4 on 4". To determine if this is a match simply measure from the center of one wheel stud to the center of the opposite wheel stud. If it is 4" this will be a great fit.
I have linked an article on how to determine wheel stud patterns if this does not match for you.
expert reply by:
Randy B
0
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 4 on 4 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Recommended Replacement Wheel and Tire for a 7.5-10 Tire
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Q&A: Can 1973 Travel Mate Camper Use ST175/80D13 Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How to Mount the Yakima OutPost HD Ladder Rack on a Utility Trailer
- Q&A: Larger Wheel/Tire Recommendation for 1997 Jayco Pop-Up Camper
- Q&A: Modern Tire Size Equivalent for 20.5x8-10
- Q&A: How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Printable Trailer Bolt Hole Pattern Template