Distance from Mounting Bolt Center of Dometic Full Timer RV Toilet DOM87FR to Rear of Toilet

Question

Question:

What is the distance from center of bolt on floor flange to back of tolit

asked by: Joe

0

Expert Reply:

On the Dometic Toilet part # DOM87FR the distance from the rear of the toilet to the mounting hole center is 11 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The amount of screw in a flange is not important, the fitment of the seal is. Please review the attached installation video and compare against what you currently have in place. Because toilets are not make and model specific to an RV,…

view full answer...

Answer 2

The seat height of the Dometic #DOM87FR Full-Timer RV toilet is 18-1/4 inches. I've provided a diagram with all the dimensions for reference.

view full answer...

Answer 3

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 4

Hey Karen, We offer a few different options with elongated bowls but they unfortunately don't come with the hand sprayer already installed. Luckily Dometic offers the #DOM75FR which you can install in just a few minutes. Before purchasing…

view full answer...

Answer 5

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

view full answer...

Answer 6

The Dometic 510 Elongated Seat Toilet part #DOM29FR basically just has a larger bowl and seat than the 320 version part #DOM87FR. The 510 is more or less just a slightly larger and heavier (by 10 lbs) standard height toilet. The 510 will seem more…

view full answer...

Answer 7

The Dometic 321 Full-Timer RV Toilet #DOM99FR you found is currently the only low profile elongated toilet we carry. We only have this in tan and not white. You can use the Hand Sprayer Kit #DOM75FR to add that feature to this or another Dometic…

view full answer...

Answer 8

You can replace your current Dometic 300 with the Dometic Full-Timer RV Toilet #DOM27FR ( #DOM87FR for white) if you like the elongated bowl design or you can replace it with a Dometic Part-Timer RV Toilet #DOM57FR if you just want another standard…

view full answer...

Answer 9

Yes, you can use an offset toilet flange like the one you mentioned with the Dometic toilet you asked about: - Dometic Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic #DOM87FR I have added a link below to a video review and…

view full answer...

Answer 10

The Dometic DOM49FR is no longer available, but we have another toilet that is nearly identical. The Dometic #DOM29FR has the same features: elongated bowl, white ceramic, sprayer included, 2 year warranty, wood seat, 2-bolt installation. The only…

view full answer...

Answer 11

The Dometic Full-Timer RV Toilet #DOM87FR you were looking at includes a new seal, new mounting studs, washers, nuts, and caps which is everything needed to install the toilet. To get the #DOM87FR installed you will need to remove the two nuts…

view full answer...

Answer 12

The Dometic 320 Full-Timer RV Toilet #DOM87FR has an overall height of 18-1/4", an overall depth of 22", and an overall width of 14-3/4". RV toilets are essentially universal parts so you'll just have to make sure you have room for…

view full answer...

Distance from Mounting Bolt Center of Dometic Full Timer RV Toilet DOM87FR to Rear of Toilet

Product Page this Question was Asked From

Continue Researching