Replacement 524664 Power Gear Slide-Out Motor

Question

Question:

Hello, I am looking for a replacement slide motor for my 2006 Eagle Cap 995. I found a cross reference chart and depending on what number I look up on etrailer it gives me different parts and I want to confirm the correct one before ordering.

asked by: Josh D

0

Expert Reply:

Thank you so much for the photos they were very helpful; I was able to confirm the correct replacement motor for your Power Gear 524664 motor.

The correct replacement for you is the Replacement Gear Motor # LC368221.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Curt Single Hook, Coiled Safety Cables with S-Hooks part #C80176 have a combined weight capacity of 7,500 lbs. The only option if you need to go much higher are safety chains like the Safety Chain with Clevis Hook part #63451. I have attached…

view full answer...

Answer 2

To replace your defective Power Gear 130-1305 RV Slide-Out motor, you'd use the LCI #LC368446 as confirmed by Lippert. The LCI #LC386322 motor you referenced replaces a different Power Gear motor, the 13-1127, so it's not the one…

view full answer...

Answer 3

The correct replacement for your Power Gear 130-1305 is the Lippert #LC368446. I've linked to a product description video for the replacement slide out motor.

view full answer...

Answer 4

I reached out to my contact at Lippert who made Power Gear. The replacement motor you want is the Replacement Gear Motor for Lippert Components Single Rail Above Floor Slide-Outs #LC368221. This is the only direct replacement for your 524664 Power…

view full answer...

Answer 5

Nice question, lets check and see what I found: **RV City Water Inlet with Brass Check Valve - 1/2" MPT - Aluminum Flange - Surface Mount #37262185. Yes, it will work. The city water connection or inlet is more of a universal part and not a…

view full answer...

Answer 6

Unfortunately when the gear box breaks the only option is going to be replacement. You could try taking it to a engine repair shop, but you'd most likely end up spending much more than the motor is worth on replacement parts, if they're even…

view full answer...

Answer 7

Lippert Components has confirmed that the Replacement Gear Motor Assembly for Lippert Slide-Out #LC368446 is the correct replacement for a Power Gear 130-1305 slide out motor.

view full answer...

Answer 8

To replace your defective Power Gear 130-1305 RV Slide-Out motor, you'd use the LCI #LC368446. I have attached a link below.

view full answer...

Answer 9

I spoke with Lippert and they confirmed yes, the cotter pin in the drive shaft on the Replacement Gear Motor Assembly for Lippert Slide-Out #LC368446 is removeable.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Replacement 524664 Power Gear Slide-Out Motor

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching