Install Harness for Redarc Tow Pro Liberty in 2015 Jeep Grand Cherokee

Question

Question:

Hi, I just ordered this part for my 2015 Jeep Grand Cherokee SRT. What cable harness do I need with this unit?

asked by: David H

0

Expert Reply:

The correct install harness for the Redarc Tow Pro Liberty part # RED24FR in your 2015 Jeep Grand Cherokee is the part # RED77FR which plugs into the factory port of your vehicle.

expert reply by: Jameson C

0

Answer 1

For the most part, the Curt Echo #C51180 is going to allow you to do what you're wanting to do; you'll still be able to have the google maps and phone functions available and running while towing. Because the Curt Echo Mobile brake controller…

view full answer...

Answer 2

To install the Redarc Tow-Pro Liberty #RED24FR in your 2021 Ram 1500 Big Horn you will need the Plug-in Adapter #331-TPH-020. The #331-TPH-020 will plug in to the factory trailer brake controller port underneath the dash of your truck and then into…

view full answer...

Answer 3

It sounds like you are having a ground issues on your trailer while using the Redarc Tow-Pro Liberty Brake Controller #RED24FR with your 2019 Toyota Highlander. The small amount of voltage you are seeing at your 7-way from the brake wire is what…

view full answer...

Answer 4

All you need to install the Redarc Tow Pro Elite part #RED44FR in your 2022 Jeep Grand Cherokee that has the factory 7-way is the correct install harness part #RED77FR which plugs in under the dash.

view full answer...

Answer 5

I was able to do some research and find that the 2021 Jeep Grand Cherokee and 2020 Jeep Grand Cherokee have the same plug and play connector for a brake controller, so you'll be able to use the Redarc Tow-Pro Elite Trailer Brake Controller - 1 to…

view full answer...

Answer 6

The best brake controller for your Durango is going to be the Redarc Tow-Pro Liberty Brake Controller item #RED24FR. This is a proportional brake controller that activates your trailer's brakes when your Durango decelerates. The reason the…

view full answer...

Answer 7

The great thing about your 2020 Jeep Grand Cherokee is that it comes with brake controller pre-wiring so to install the Redarc Tow Pro Liberty part #RED24FR all you need is the install harness part #RED77FR and you'd be set. I attached an install…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Install Harness for Redarc Tow Pro Liberty in 2015 Jeep Grand Cherokee

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching