Safety Chain Loop Recommendation for 2020 Ford F-350 with OEM Rail Kit

Question

Question:

I just purchased a 2020 f350 and it has the towing pkg. I have a in ball from my Ram, but the anchors do not fit the Fords. What Safety Chain loops do you reccomend. I haul a gooseneck horse trailer.

asked by: Scott R

1

Helpful Expert Reply:

The Cut safety chain loops part # C60691 are a confirmed fit for the OEM rail kit of your 2020 Ford F-350. We recommend this kit the highest as the loops are larger and easier to attach chains to.

expert reply by: Jameson C

1

Answer 1

There is an option for an offset gooseneck for your 2023 Ford F-250 or F-350 Super Duty with the OEM puck system, but it isn't just the hitch ball. Technically it's a gooseneck hitch and gives you 5 inches of offset; the hitch is from Gen-Y…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Yes, the Curt Safety Chain Loops for Ford Factory Rail Kit part #C60691 that you referenced are a confirmed fit for the factory rail kit in the bed of your 2019 Ford F-350. I attached a review video for this kit for you to check out as well.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be prone to…

view full answer...

Answer 8

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 12

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Safety Chain Loop Recommendation for 2020 Ford F-350 with OEM Rail Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching