A-Frame Trailer Jack that Can Fit 2 inch Diameter Mounting Flange

Question

Question:

I am replacing an A-frame Jack where the opening for the jack is 2. Is this the only option available? DL22530

asked by: Brian

0

Expert Reply:

The Dutton Lainson Trailer Jack # DL22530 that you referenced would work great for your application as its outer tubing diameter is 2 inch so it would fit perfectly in the 2 inch opening you have now.

For more info on this USA made jack check out the review video link I attached as well.

expert reply by: Jameson C

0

Answer 1

I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…

view full answer...

Answer 2

An A-frame trailer jack that fits your 2 inch outer tube diameter is the Dutton-Lainson #DL22530. It provides 15 inches of lift and has a 1,000 pound capacity. When fully retracted you'll have about 8-3/4 inches of clearance. Of the 2 inch…

view full answer...

Answer 3

The only jack we have that has that 2 inch outer diameter upper tube is the Dutton-Lainson A-Frame Trailer Jack - Sidewind - 1,000 lbs item #DL22530. If your trailer's a-frame coupler will not accommodate anything larger than a 2" jack you…

view full answer...

Answer 4

I do have an option for you but the Ultimate Trailer Jack part #322-RDJ-2K only comes with an outer diameter of 2-1/4". The 2" outer diameter tube jacks are harder to find. We do have the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by…

view full answer...

Answer 5

For the Dutton Lainson trailer jack part #DL22530 that you referenced we have the replacement wheel part #DL22414.

view full answer...

Answer 6

Yes, we have the Dutton Lainson A-Frame Jack #DL22530 which has an outer diameter of 2 inches. This jack has a 1,000 lb capacity and has the optional foot part #DL22541 or wheel caster part #DL22414.

view full answer...

Answer 7

Given the 3500 lb weight of your trailer, your tongue weight will be somewhere between 350 and 525 lbs, so you won't need a jack with a super-high capacity. This being said, choosing a jack with a higher rating than you need isn't a bad idea.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

A-Frame Trailer Jack that Can Fit 2 inch Diameter Mounting Flange

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching