What is Width Between Attachment Points on Roadmaster Tow Bars

Question

Question:

Looking to create a tow bar for a VW Splitscreen Type2 1959. Going to fabricate some brackets that connect to the chassis, same mounting point as the front bumper brackets. Is the width of mounting options with this tow bar system adjustable and what is the stick width?

asked by: James W

0

Expert Reply:

For Roadmaster tow bars like the # RM-501 the distance between the mounts is going to be 28-1/2 inches.

expert reply by: Jameson C

0

Answer 1

You can utilize the crossbar mounting system on your Roadmaster StowMaster Tow Bar #RM-501 as long as you use a Roadmaster Crossbar Style base plate on your 2013 Jeep Wrangler. We have a couple of different options depending on the sub-model of…

view full answer...

Answer 2

Towing your Jeep Wrangler TJ behind your motorhome requires a tow bar, a kit to connect the tow bar to the Jeep, a lighting solution, and a braking system. You also may need a way to maintain the Jeep's battery while towing and a high-low adapter…

view full answer...

Answer 3

The Blue Ox Acclaim Tow Bar #BX4330 that you referenced can be used with base plate kits that are between 23 and 30 inches apart.

view full answer...

Answer 4

I spoke to my contact at Roadmaster and while she had a hard time finding your specific serial number in their system she was confident that your tow bar was made in 2010.

view full answer...

Answer 5

To convert your Roadmaster StowMaster Tow Bar #RM-501 to a set of motorhome mounted Roadmaster tow bars you will need the Crossbar #RM-067. This will allow you to use tow bars like the Roadmaster Falcon All Terrain #RM-522 or our best selling…

view full answer...

Answer 6

The only difference between the Roadmaster Direct-Connect Base Plate Kits like part #RM-523179-5 and the Roadmaster Crossbar-Style Base Plate Kits like part #RM-523179-4 are the removable arms. The Direct-Connect style means you can attach a tow bar…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

What is Width Between Attachment Points on Roadmaster Tow Bars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching