How To Mount a Toolbox On a Truck With Thule TracRac Sliding Ladder Rack

Question

Question:

I am looking for truck tool box that works with 2003 silverado tracrac

asked by: John S

0

Expert Reply:

In order to mount a crossover style tool box on a truck with Thule TracRac Sliding Ladder Rack you will need an adapter, the Toolbox Mounting Kit for Thule TracRac SR, Utility Rac, and G2 Sliding Ladder Racks part # TH25200. This will then allow you to use pretty much any crossover style toolbox such as the UWS Truck Bed Toolbox part # UWS07642 which is what I recommend because of the low profile design.

expert reply by: Conner L

0

Answer 1

I was able to find a picture that I took from the instructions for the Toolbox Mounting Kit #TH25200 that shows how it installs to the tracks of a TracRac ladder rack and to a toolbox. We don't have any real pictures but the diagram picture…

view full answer...

Answer 2

I attached a picture I took from the install instructions of the Toolbox Mounting Kit for Thule TracRac SR #TH25200 that you referenced that shows how it installs relative to a TracRac SR ladder rack. If you wanted to add a cantilever extension to…

view full answer...

Answer 3

I attached a picture I took from the install instructions of the Toolbox Mounting Kit for Thule TracRac SR #TH25200 that you referenced that shows how it installs relative to a TracRac SR ladder rack.

view full answer...

Answer 4

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb…

view full answer...

Answer 5

For your 2024 Chevy Silverado 1500 I recommend the Redarc Tow Pro Elite #RED63RR. You can use it along with the Plug in Adapter #3064-P for a plug and play install, since you already have the factory tow package. The Redarc controller is going to…

view full answer...

Answer 6

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Hi Timothy; for your 2024 Chevy Silverado 1500 diesel we have the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. This is the only front hitch without the diesel restriction.

view full answer...

Answer 9

Hello Clint. The Draw-Tite Front Mount Hitch #DT44HR will indeed bolt up to a 2024 Chevy Silverado 1500 ZR2. Some trimming of the air dam and bumper fascia may be required for installation.

view full answer...

Answer 10

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

Hey Gregg, The etrailer Hard Tonneau Cover #e23DR mounts to the inner lip of the bedrails with clamps so you'll need access to that lip in order to install it. If your bed liner is plastic you can just cut out holes where the clamps sit in order…

view full answer...

How To Mount a Toolbox On a Truck With Thule TracRac Sliding Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching