Where is Height Measurement on Trailer Hangers # APT5 Taken
Question:
This comes with 3 3/4inch tall hangers, is that the overall height of the hanger or the measurement from the top of the hanger to the center of the spring mounting bolt hole? Thanks,
asked by: Kevin L
0
Expert Reply:
The heights of the hangers that come with the kit part # APT5 is the distance from where they attach to the frame of the trailer to the bolt hole center of the hanger.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Determine Hanger Spacing on a Tandem Axle Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Article: Trailer Tire Sizing
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Q&A: How to Decide Which Tandem Axle Trailer Hanger Kit to Use
- Q&A: Suspension Parts Needed for 3,500 lb Tandem Axles and 29-1/2" Hanger Spacing
- Q&A: How to Determine Correct 6,000 lb Leaf Springs