Bike Rack Cover for Hollywood Rack RV Rider Bike Rack

Question

Question:

Bought Hollywood HLY64FR RV ebike rack from you. What cover do you recommend. Have 1 bike. Some reviews dpszy the swagman s24FR not waterproof and tears.

asked by: John P

0

Expert Reply:

For e-bikes the bike cover you'd want is the part # S24FR which is larger than other covers. As long as you are using the cover at the rear of an RV you'd be fine. RVs are much bigger and block more wind than standard vehicles which is why this cover can be used. Typically when people report tears or damage its that they used the cover on a passenger vehicle and the wind was too much. While this rack is not waterproof, it is constructed of water-resistant, 420-denier nylon to keep your bikes dry

expert reply by: Jameson C

0

Answer 1

The bike cover will fit over bikes up to 70 inches long and widths of up to 24 inches. The cover would be able to slip over the swing away portion, but it would not allow it to operate with the cover zipped up. The Swagman #S24FR Bike Cover is only…

view full answer...

Answer 2

The only bike rack cover we offer can only be used in an RV application is the Swagman part #S24FR which would work great with the Hollywood Racks Sport Rider SE part #HLY84FR that you have. You'll have to make sure that the circumference of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Due to the limits of trailer taillight wiring circuits your Hollywod Racks Safety LED light bar part #HLY54RR is functioning properly. The turn signals and the stoplights are all on the same circuit so the lights are going to all light up when you…

view full answer...

Answer 5

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 6

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 7

Your best platform bike rack for spare clearance is the RV Rider part #HLY64FR as it has the most clearance between the hitch pin hole and the wheel trays. This has 12 inches from the pin hole to the pivoting portion of the rack but then has even…

view full answer...

Answer 8

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 9

Yes, the Swagman 2 Bike Bag for Trailer Hitch Bike Racks #S24FR that you referenced will fit well covering bikes loaded on a Swagman Dispatch #S44FR. I attached a video for your to check out.

view full answer...

Answer 10

Your best option for a bike cover would be the Swagman Bike Cover #S24FR. This cover is restricted to only RV applications. Rv's block most of the wind and keeps the cover from ripping. It's water resistant and has a large zipper to make it…

view full answer...

Bike Rack Cover for Hollywood Rack RV Rider Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching