Do Reflectors # RE35Ab and # RE35RB Meet SAE DOT Requirements for Over 80 Inch Wide Trailers

Question

Question:

Do these reflectors: RE35RB, RE35AB, meet the DOT FMVSS 108 requirements for use on trailers over 80inch in width? Better, can you tell me what SAE specifications do these reflectors meet?

asked by: Raymond J

0

Expert Reply:

On all trailers, regardless of width, reflectors with an SAE code A are required in certain locations on the rear, side, and front of the trailer. The reflectors # RE35RB and # RE35AB do have the A SAE rating.

expert reply by: Michael H

0

Answer 1

The reflectors, #RE35RB and #RE35AB are made of Polymethyl methacrylate better known as acrylic. This is the same grade and manufacturing process as the lenses on vehicles. They aren't exactly sealed per se because they do not have to be. the…

view full answer...

Answer 2

In order to replace the light bulb part #67 inside of the Optronics Snap-In Mini License Plate Light part #LP11CB you will need to take a small screwdriver and then pry the light base away from the housing. I have attached a photo for where you will…

view full answer...

Answer 3

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Do Reflectors # RE35Ab and # RE35RB Meet SAE DOT Requirements for Over 80 Inch Wide Trailers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching