Replacement Galvanized 4 on 4 Hub with 1.249 ID Grease Seal
Question:
I need a 4 bolt - 4 inch tall galvanized hub for a 1.0625 diameter axle with a 1.25 ID seal and a zerk fitting on the axle. Can you please let me know which hub fits that description. Thanks,
asked by: Brian
Expert Reply:
It sounds like you might be looking for the # AKIHUB-440-2-G-EZ-1K which uses a grease seal with a 1.249" ID. However, you will want to confirm that the bearings match as well. The AKIHUB-440-2-G-EZ-1K uses the inner and outer bearing # L44643 which is a 1" inner diameter bearing. As long as those also match, this will be the correct hub you're looking for and is compatible with EZ lube axles like yours.
If you find a different bearing in the hubs, just let me know what you've got and I can help you find an acceptable replacement.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Most Popular Wheel Bearings
- Article: Best Boat Trailer Jacks
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How To Tell If I Have An EZ Lube Axle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Are The DeeMaxx Hub/Rotor Assemblies Compatible With Kodiak 225 Calipers?
- Article: Measuring a Trailer Tire
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: Recommended 56" Long Trailer Axle with 4-Lug Hubs
- Article: How to Determine Tire/Wheel Diameter
- Q&A: Socket Size Needed to Remove and Re-Torque Nut for Replacing Nev-R-Lube Bearing