Does Pace Edwards UltraGroove Tonneau Cover for 2020 Ram 1500 5-1/2 Foot Bed Work With Duraliner

Question

Question:

I have a Duraliner system in my 2020 Ram 1500 - can I still install the Pace Edwards UltraGroove Hard Tonneau Cover?

asked by: Mike R

0

Expert Reply:

Yes, the two will work together! The Pace Edwards UltraGroove Retractable Hard Tonneau Cover # 311-KRDA24A55 that fits your 2020 Ram 1500 with a 5-1/2 foot bed will work with a Duraliner bed liner. This cover works with under the rail bed liners and according to my research that what your Duraliner is, though I do recommend verifying.

I have added a link to the installation instructions for you to check out as well of the Pace Edwards UltraGroove Retractable Hard Tonneau Cover # 311-KRDA24A55.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 8

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 9

You'll need to adjust the bunks on the Malone LowBed MicroSport Trailer #MAL25FR some to account for the shape of the pontoons but yes, this trailer will have no issues working with your Blue Sky Boatworks 360 Pro fishing kayak!

view full answer...

Answer 10

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

With most weight distribution systems (including this Reese kit part #RE94FR), you can back up with the spring bars connected as long as you are backing up mostly straight, but if you are going to angle the trailer and tow vehicle sharply you need to…

view full answer...