Removing the Ranch Hitch Adapter # AM3100 From a 5th Wheel Trailer King Pin
Question:
AM3100 will not come loose from my fifth wheel travel trailer so that I can use my fifth wheel hitch. It is not welded and the bolts on the flange are not in it. How do I get it off of the trailer?
asked by: Robert
Expert Reply:
Along with the flange bolts, the Ranch Hitch Adapter, # AM3100, should also be screwed onto the king pin with a collar system, see attached photo. Once the bolts are removed from the trailer pin box, you will need the Spanner Wrench for Ranch Hitch Coupler Adapters, # AM3104, and a 4 foot cheater pipe, along with two full grown men to release the the adapter from the threaded collar. Initial tightening is done at 1200 foot pounds of torque, or as much torque as two men can generate.
Once the adapter is un-threaded, you may need to use a large socket, or other sturdy round item larger than the diameter of the king pin, and a hammer to unseat the threaded collar from the 2 half round wedges.
Products Referenced in This Question
Replacement Spanner Wrench for Ranch Hitch Coupler Adapter
- Accessories and Parts
- Gooseneck and Fifth Wheel Adapters
- Wrench
- Andersen
more information >
Product Page this Question was Asked From
Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter
- Gooseneck and Fifth Wheel Adapters
- Adapts Trailer
- Fifth Wheel Trailer to Gooseneck Hitch
- No Offset
- 24000 lbs GTW
- Bolts Over King Pin
- Adjustable Height
- King Pin Adapters
- Andersen
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Q&A: How to Remove the Ranch Hitch Fifth Wheel Adapter 3100
- Q&A: Recommended Clearance Dimensions Between Truck Bed Rails and 5th Wheel Trailer
- Q&A: 5th Wheel to Gooseneck Adapter to Replace Lippert Turning Point Pin Box on Jayco HT 30.5 CKTS
- Q&A: 5TH Wheel Hitch/Adapter For CM Truck Beds Flatbed On a 2016 Ram 3500
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Gooseneck Trailer Hitch Information and Review
- Q&A: Gen-Y Gooseneck Pin Box For A 2022 Forest River Sierra Luxury 321RL Fifth Wheel
- Article: 5th Wheel to Gooseneck Adapters