Replacement Hub Assembly with 15123 Inner Bearing and 09067 Outer Bearing

Question:

Hello I have a 1950 uhaul tilt traler. I need 2 complete hub assemblys. I have a tapered spindle the inner bearing numbers are 15123. The outer bear numbers are 09067. Its a five lug as well. Please let me know if you have anything they will work.

asked by: Christopher

Expert Reply:

Unfortunately it doesn't look like we've got any hubs that will work for this size spindle. For that reason, your best bet is likely going to be to replace the entire axle with a new one # 20545I-EZ-72-15 which comes with hubs included with a 5 on 4-1/2" bolt pattern, and the EZ lube spindles allow you to keep your bearings well lubricated.

You will want to verify that your current axle's dimensions measure 72" from hub face to hub face and 58" from spring center to spring center, in order to confirm a proper fit.

If you take your measurements and find that you've got a different measurement from hub face to hub face and spring center to center, please let me know what you find and I can work to see if we can find an acceptable replacement.

expert reply by: Erik B