Availability of a 600 Series Penguin A/C Shroud Replacament

Question

Question:

Will this part fit my Model # 600315.421?

asked by: Ted D

0

Expert Reply:

Yes the Replacement Shell White Shroud part # AT3308046006 is in fact a direct replacement for your Penguin model 600315.

expert reply by: Randy B

0

Answer 1

What you need is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners #AT3308046006. This is the correct shroud for your Dometic 600312.321.

view full answer...

Answer 2

I was able to confirm for you that the shroud is the same for both the Penguin model 600315 and the 600312 air conditioners. So the correct replacement shroud for your Penguin 600312 is the following: - Replacement RV Air Conditioner Cover for…

view full answer...

Answer 3

The Replacement Shell White Shroud for Penguin and Dometic Air Conditioning Units part #AT3308046006 as the title states is designed for Penguin and Dometic air conditioning units so if this is what you have then yes, it will work for you. That said,…

view full answer...

Answer 4

Great News! I reached out to Dometic to confirm and the Replacement Shell White Shroud part #AT3308046006 is exactly what you need for you Duo-therm Brisk Air AC unit. The screw holes will match up and it will be a very quick and easy installation.…

view full answer...

Answer 5

The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners - Beige item #AT3308046006 you referenced is designed to be an exact replacement for the Dometic Model 600315-321 air conditioner. To confirm it will fit you can…

view full answer...

Answer 6

The Atwood #AT3308046006 cover that you selected will likely work just fine. I contacted the manufacturer and they did not have your model 600315.321 so I can't spec out the exact one. There may be another sticker on your unit ending in .331 or…

view full answer...

Answer 7

The Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners - Beige #AT3308046006 you were looking at is designed to be an exact replacement for you Penguin Duo Threm Model 600315-321 air conditioner so this will be what you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Availability of a 600 Series Penguin A/C Shroud Replacament

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching