Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb Axles
Question:
Which freewheel galvanized hub and bearings would work for same trailer. I also want to add stainless disk rotors and calipers then to the hubs.
asked by: Mike M
Expert Reply:
The Kodiak Disc Brake Kit part # K2HR35DS is a great option to replace the disc brakes on a Shoreland'r Boat Trailer. It has dacormet and stainless steel finishes so it will hold up to salt water just fine. The hubs and rotor are integrated into one another which will make for easy replacement.
Please note, you'll also need the Bearing Kit for Trailer Brakes part # DBRKHW35EZ to complete the installation.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 3500 lbs
- Bearing L68149 and L44649
- etrailer
more information >
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacing Knott Brand Brake Calipers And Rotors On A Coyote Boat Trailer With 3,500 lb Axles
- Q&A: Kodiak Disc Disc Brake Kit Replacement for 2019 Coyote Dual Axle Boat Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: What is Maxx Coat on DeeMaxx Disc Brake Kit and Why is There a Mix of That and Stainless Steel
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Article: What To Look For When Buying Ratchet Straps
Mike M.
6/26/2020
Which freewheel galvanized hub and bearings would work for same trailer. I also want to add stainless disk rotors and calipers then to the hubs.